Roller (shutter) actuator,
18-channels JA3-018M

EAN: 8595188174466 | Code: 7446 standard

DESCRIPTION

  • JA3-018M is an actuator designed for controlling rollers, shutters, blinds, awnings, garage doors, entrance gates, etc.
  • It controls electric drives that are controlled in two directions and have a built-in limit switch.
  • The unit's status is indicated by the green RUN LED on the front panel
    - if the power supply is connected, but there is no communication via BUS with master, the LED RUN is on continuously.
    - if the supply voltage is connected and the unit communicates by BUS, the LED RUN fl ashes.
  • The status of the output contacts is indicated by the U/D LED:
    ​- when the blind/roller blind is moving up/down, the corresponding LED lights up.
    - if the number of switching operations per minute is exceeded, the corresponding LED fl ashes.
  • JA3-018M in 6-MODULE version is designed for mounting into a switchboard on DIN rail EN60715.

TECHNICAL PARAMETERS

  • Output: 9x changeover 4 A/AC15
  • Switched voltage: 250 V AC, 24 V DC 
  • Installation BUS: BUS
  • Supply voltage by BUS/ tolerance/nominal current: 27 V DC, -20/+10 %, 5mA 
  • Protection degree: IP20 device, IP40 mounting in the switchboard 
  • Installation: switchboard on DIN rail EN 60715 
  • Design: 6-MODULE 
  • Dimensions: 90 x 105 x 65 mm 
  • Weight: 346 g 

Downloads

Customer Centre

Technical support for the UK

+44 01626 912 407

Sales Team

+44 01626 886 342
+44 07719 321 186