Analog controller, 0(1)-10 V RFDAC-71B

Analog controller 0(1) - 10V

EAN: 8595188142809 | Code: 4993

DESCRIPTION

  • The device with analog output 0(1) -10 V is used to control devices, luminaires, thermal actuators and thermal heads - which are equipped with such an input.
  • They can be combined with detectors, controllers, iNELS RF Control or system components.
  • Potential free analog output 0(1) -10 V, contact relay 16 A.
  • 6 light functions - smooth increase or decrease with time setting 2 s - 30 min. 
  • The analog controller may be controlled by up to 25 channels.
  • The programming button on the controller is also used for manual control of the output.
  • Memory status can be pre-set in the event of a power failure.
  • Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
  • Communication frequency with bidirectional protocol RFIO2.
  • The BOX design lets you mount it right in an installation box, a ceiling or light cover.

TECHNICAL PARAMETERS

  • Output: 0(1) - 10 V contact 1 VA
  • Supply voltage (frequency): AC 110-230 V (50/60 Hz)
  • Design: BOX
  • Dimensions: 49 x 49 x 21 mm
  • Protocol: RFIO2

Downloads

Customer Centre

Technical support for the UK

+44 01626 912 407

Sales Team

+44 01626 886 342
+44 07719 321 186