Dimming actuator for LED (RGB) strips, 3-channels RFDA-73M/RGB

3-channels

EAN: 8595188146814 | Code: 4916

Description

  • The dimmer for LED strips is used for independent control of 3 singlecolor LED strips or one RGB LED strip.
  • The expanded selection of control modes enables it to be combined with:
    a) controllers and system units iNELS RF Control
    b) control signal 0(1) - 10 V
    c) connecting to iNELS BUS using DAC converters.
  • The unit‘s 3-MODULE design with switchboard mounting enables connection of dimmed load 3 x 5 A, which represents:
    a) single-color LED strip 7.2 W (ELKO Lighting) – 3 x 8 m
    b) RGB LED strip 14.2 W (ELKO Lighting) – 10 m.
  • 6 light functions - smooth increase or decrease with time setting 2s - 30 min.
  • When switched off , the set level is stored in the memory, and when switched back on, it returns to the most recently set value.
  • The dimmer may be controlled by up to 25-channels (1-channel represents 1 button on the controller).
  • The power supply of the unit is in the range of 12 - 24 V DC, and is indicated by a green LED.
  • The package includes an internal antenna AN-I , in case of locating the unit in a metal switchboard, you can use the external antenna AN-E for better signal reception.
  • Signal range up to 160 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
  • For components labelled as iNELS RF Control2 (RFIO2), it is possible to set the repeater function via the RFAF/USB service device.
  • Communication frequency with bidirectional protocol iNELS RF Control2 (RFIO2).

TECHNICAL PARAMETERS

  • Output: 3x 5 A
  • Supply voltage (frequency): DC 12-24 V stabilized
  • Design: 3-MODULE 
  • Dimensions: 90 x 52 x 65 mm
  • Protocol: RFIO2

Downloads

Customer Centre

Technical support for the UK

+44 01626 912 407

Sales Team

+44 01626 886 342
+44 07719 321 186