Dimming actuator for electronic ballasts, 2-channels LBC3-02M

Dimming actuator for electronic ballasts
2-channels

EAN: 8595188132688 | Code: 3268 standard

Description

  • LBC3-02M is an analog 2-channels actuator designed to control dimmable ballasts of fl uorescent lamps or other light sources controlled by signal 0(1) - 10 V DC.
  • In the iDM3, it is possible to set the output mode 0(1) - 10 V DC.
  • During analog voltage output (0)1-10 V DC control, relay contact automatically switches power supply to light ballast (0% = relay OFF, 1-100% = relay ON)
  • LBC3-02M contains 2 independent analog voltage outputs (0)1-10 V DC and their dependents 2 relays with potential-free contact.
  • Maximum contacts load 16 A/4000 VA/AC1.
  • Each of two channels is separately controllable and addressable.
  • LEDs on front panel signals status of each channel.
  • With control buttons on the front panel, it is possible to change the status of each channel separately.
  • LBC3-02M in 3-MODULE version is designed for mounting into a switchboard/ DIN rail EN60715.

Technical parameters

  • Output: 2x 0(1)-10 V 2x CO, 16 A
  • Supply voltage (frequency): BUS 27 V DC
  • Rated current from BUS: 60 mA (at 27 V DC)
  • Housing: 3-MODULE
  • Dimensions: 90 x 52 x 65 mm

Downloads

Customer Centre

Technical support for the UK

+44 01626 912 407

Sales Team

+44 01626 886 342
+44 07719 321 186