Roller (shutter) actuator,
2-channels JA3-02B/DC

DESCRIPTION

•  JA3-02B/DC actuator serves to control blinds, shutters, garage doors, entrance gates, etc.
•  Actuator can control electrical motors, which are controlled in 2 directions and have a built-in limit switch.
•  JA3-02B/DC controls electric drives with supply voltages up to 24 V DC, where the direction of rotation of the driver is controlled by changing the voltage polarity of the motor.
•  The unit is equipped with thermal and overcurrent overload protection of outputs.
•  The status of units is indicated by green LED RUN on the front panel:
  - with the supply voltage connected (through BUS) and the unit is not controlled by BUS, LED RUN shines.
  ​- with the supply voltage connected (through BUS) and the unit is controlled by BUS, LED RUN flashes.
•  Status of output contacts UP/DOWN ( ):
  - while contact UP ( ) is switched, red LED shines (orange).
  - while contact DOWN ( ) is switched, green LED shines.
•  The unit is also equipped with two analog digital inputs (AIN/DIN), which can be used to connect two potential free contacts (e.g. to connect double button for local control) or a single external temperature sensor TC/TZ (see accessories).
•  JA3-02B/DC is designed for mounting into an installation box.

TECHNICAL PARAMETERS

• Number of contacts: DC 1x 12-24 V 
• Switching current: 0.85 A
• Supply voltage (frequency): BUS 27 V DC
• Rated current from BUS: 60 mA (at 27 V DC)
• Housing: BOX
• Dimensions: 49 x 49 x 13 mm

Downloads

• Datasheet JA3-02B DC

  Format: pdf | Size : 134 kB | 29. 09. 2022

• EC Declaration of conformity JA3-02B-DC

  Format: pdf | Size : 47 kB | 04. 12. 2017

• Manual multilanguage JA3-02B DC

  Format: pdf | Size : 2 MB | 22. 04. 2020