Wireless switch unit with the input (for a pushbutton) - RFSAI-61B

DESCRIPTION

• The switching unit with 1 output channel is used for controlling appliances and lights. It is possible to connect the existing button to the internal terminal in the wiring.
• They can be combined with detectors, controllers, iNELS RF Control or system components.
• The BOX design lets you mount it right in an installation box, a ceiling or controlled appliance cover.
• It enables connection of the switched load up to 16 A (4 000 W).
• Function: button, impulse relay and time function of delayed start or return with time setting range of 2 s-60min.
• External button is programmed as a wireless button.
• Input is not galvanic isolated.
• The switching unit may be controlled by up to 25 channels (1 channel represents 1 button on the controller).
• The programming button on the unit is also used for manual control of the output.
• Memory status can be pre-set in the event of a power failure.
• For components it is possible to set the repeater function via the RFAF / USB service device.
• Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
• Communication frequency with bidirectional protocol iNELS RF Control2 (RFIO2 ).

TECHNICAL PARAMETERS

• Power supply AC 230 V, AC 120 V or AC/DC 12 – 24 V.
• Number of contacts: 1x switching 12 A (AgSnO2)
• RF command from the detector: 866 MHz, 868 MHz, 916 MHz
• Manual control: button PROG (ON/OFF)
• Range in open space: up to 160 m
• Working position: any
• Protection: IP30
• Dimensions: 49 x 49 x 21 mm
• Weight: 50g

Downloads

• Datasheet RFSAI-61B

  Format: pdf | Size : 428 kB | 27. 03. 2019

• EC Declaration of conformity RFSAI-61B 230V

  Format: pdf | Size : 47 kB | 26. 10. 2017

• EC Declaration of conformity RFSAI-61B 24V

  Format: pdf | Size : 49 kB | 26. 10. 2017